What are the maintenance aspects of concrete laser leveling machine?

◆ Daily inspection
Routine inspections are key to ensuring that your concrete laser leveling is working properly and extending its service life. After each day's work is completed, the following inspections should be carried out on the leveling machine:
1. Check the engine oil level and coolant level to ensure sufficient oil and water.
2. Check whether the screws of each component are loose, and tighten them in time if they are loose.
3. Check whether the cable is damaged and replace it immediately if it is damaged.
4. Check whether wearing parts such as scrapers and laser transmitters are seriously worn. If they are severely worn, replace them in time.
◆ Regular cleaning
Regular cleaning of the concrete laser leveling can prevent dirt and debris from causing damage to the equipment and improve the efficiency of the equipment. The leveling machine should be thoroughly cleaned once a week. Key cleaning areas include:
1. Engine: Use professional engine cleaner to clean to remove carbon deposits and sludge.
2. Laser transmitter: Wipe it with alcohol cotton to remove dust and fingerprints.
3. Scraper: Polish with sandpaper or replace with a new scraper
4. Cable: Wipe with dry cloth and keep dry
◆ Lubrication system
The lubrication system of a concrete laser leveling is vital to the normal operation of the equipment. Equipment should be lubricated regularly. The lubrication parts include:
1. Use professional engine lubricating oil for the engine crankshaft, connecting rod and other parts.
2. Use professional grease for each bearing, chain and other parts
3. Regularly check whether there is any leakage in the lubrication system, and deal with it promptly if there is any leakage.
◆ Battery and charger
The battery and charger of the compact soil laser leveler are the energy supply system of the equipment and require special attention and maintenance. Batteries and chargers should be checked regularly for the following:
1. Check the battery power and charge it in time if the power is insufficient.
2. Check whether the charger is working properly. If there is any problem, repair or replace it in time.
3. When the device is not used for a long time, the battery should be removed, stored separately and charged regularly to prevent battery damage.
4. Avoid using the battery at too high or too low temperature to prevent the battery from overheating or freezing. 5. Avoid over-discharging or charging the battery to prevent shortening of battery life.
◆ Replacement of wearing parts
Some parts of the compact soil laser leveling machine are wearing parts and need to be replaced regularly to ensure the normal operation of the equipment and extend its service life. These wearing parts include:
1. Scraper: Replace regularly according to the degree of wear. It is recommended to replace it every 50 hours of work.
2. Filter: Replace regularly according to working conditions. It is generally recommended to replace it every 200 working hours.
3. Cable: If damaged, it should be replaced in time. It is generally recommended to replace it once a year.
4. Seals: If there are signs of aging, oil leakage, etc., they should be replaced in time.
5. Replacement of wearing parts should be carried out in accordance with the equipment manufacturer's recommendations, and original accessories should be used to ensure equipment performance and safety.
◆ Safety inspection
Safety inspection is an important part of the maintenance of concrete laser leveling machine, which can ensure that the equipment will not cause accidents during work. The following safety checks should be performed on the equipment regularly:
1. Check whether the screws of each component are loose, especially the screws of the engine and important components.
2. Check whether the cable is damaged to prevent electric shock accidents.
3. Check the equipment for oil leakage to prevent fire accidents.
4. Check whether the lights and alarms of the equipment are working properly and ensure that the equipment can send out warning signals in time during work.
5. Check whether the emergency stop button of the equipment is working properly to ensure that the equipment can be stopped immediately in an emergency.
6. When conducting safety inspections, the equipment manufacturer's safety operating procedures and precautions should be followed to ensure the safety of the inspection process. If safety hazards are discovered, they should be dealt with promptly to prevent accidents.