VANSE VS836H 24HP 18.4KW Ride On Hydraulic Concrete Power Trowel Manufacturer Concrete Power Trowel For Concrete Floor

Ride-on Power Trowel can be used in surface finishing of concrete road, terrace, boatyard, airport and floor ect. Variable clutch provides proper torque and speed range to match concrete conditions. Ride-on operation reduces intensity of labor and increases efficiency of work. With dual rotor, heavier weight and much better compaction, the efficiency is higher than walk-behind power trowel. Safety switch can shut off engine at once to ensure security of operator. Low barycenter design provides stable operation.

BUILT-IN NOZZLE

The built-in water spraying device delivers an even spread and can work intermittantly – a feature that is instrumental in providing excellent compaction and slurry extraction effects.

ENGINE

VS836H ride on power float is powered by a high-power fuel HONDA GX690 engine, reputed for its unwavering reliability and unfaltering functionality. This engine brings you copious horsepower and is incredibly easy to start.

ELECTRIC START

With an electronic key-start system, you can get the motor running swiftly and conveniently.

LED LIGHTS AT THE FRONT AND REAR

The VS836H ride on power floatis equipped with two front and one rear LED lights, making it easier to handle in low-light conditions.

BLADES

Quality meets durability in our ride-on trowel. The 65 manganese steel blade is wear-resistant and extremely long-lasting.
Furthermore, the smooth ground finish provided by this steel blade fortifies its wear resistance.

WATER/ FUEL TANK

An enlarged water tank and oil tank are features that aim to streamline your workflow. They are not only convenient but also save significant time and effort. The added advantage is the ability to spray water on the ground while swiftly polishing it.

● Always keep unauthorized, inexperienced, untrained people away from this machine.
● Rotating and moving parts will cause injury if contacted. Make sure guards are in place. Keep hands and feet away from moving parts.
● The engine must always be stopped before attempting any repair or adjustments. Ignition key should be off.
Danger: Never operate the machine in an explosive atmosphere, near combustible materials or where ventilation does not clear exhaust fumes. Repair fuel leaks immediately. Refer to your engine owner manual for more safety instructions.
● Be careful not to come in contact with the muffler when the engine is hot, serious bums may result!
● Always operate the machine in a seated position to maintain machine balance.
● The transporter is designed for moving the unit around the job site only. It is not to be used for towing the Ride-On unit off-site.
● When starting the trowel, do not exceed the 1/4 throttle position as recommended. A higher setting could cause the centrifugal clutch to engage, activation the trowel blades.
● Be careful with the trowel around stub pipes or other obstructions on the floor. Should the machine catch, or hit such an obstruction, serious damage may result to the machine, or operator may be thrown from the machine.
● Excess surface water may result in sudden loss of control of steering.
● Disconnect battery before attempting any electrical maintenance.
● Ensure that the electrical dead-man switch, located under the left foot pedal is operating. Placing your left foot flat on the pedal will engage the safety switch. Removing you foot from the pedal will disengage the safety switch and stop the engine. The engine will not start unless the safety switch is depressed. This safety feature must be used as designed.

Shandong Vanse Group came into being in 2013. The enterprise seizes the historical chance presented by the swift growth of the concrete industry and adheres to the development orientation of being high-end, of superior quality and highly efficient. Soon, it emerged as a national high-tech enterprise integrating the research, development, manufacturing, sales and after-sales service of concrete equipment. The company has successfully established project collaborations with multiple partners including Jingdong Logistics, Ningde Times, Great Wall Motor Company Limited and CSCEC (China State Construction Engineering Corporation).

Vanse Group is composed of numerous business divisions such as Vanse Machinery, Wanhui New Energy, Wanli Pre-control Machinery Manufacturing, Vanse Road and Bridge, Shanghai Vanse Machinery and so on. Its products are distributed to all 31 provinces, municipalities and autonomous regions across China. Moreover, its products are exported to over 30 countries and regions including the United States, the United Kingdom, Russia, Germany, Saudi Arabia, Australia and others.

In 2018, Vanse Group entered into a technical cooperation agreement with British experts, introduced international advanced technology and attained international standards for the combination of humanized mechanical design and performance with laser systems. It also forged in-depth cooperation ties with Shandong University and Chang'an University, integrating industry, academia, research and application.

Vanse Group has always been pondering over the future and chasing the aspiration of creating a better life for humanity.

Seize the present and realize the future. Vanse will jointly create a splendid future with you!

1. GENERAL
● Keep engine oil clean. Change according to engine manufacturer specifications.
● Maintain the oil levels in the engine and gearbox assemblies. Change as required.
● Use only clean fuel in the engine.
● Check for loose nut s and bolts on the trowel and tighten as necessary.
● Check belts for wear, replace if worn.
● Grease all fittings daily. See diagram.
● Clean the unit after every use to prevent hardening of sludge. Hard concrete is very difficult to remove, greatly increases weight and reduces efficient subsequent operation of unit.
● Check clutch linings regularly for wear. Linings should be changed when 3/4 worn. Do not allow metal to metal contact as this will damage the clutch drum. (New lining is 8mm.)
2. AIR CLEANER
Maintaining a clean engine will extend engine life. Keep air filter dean at all times. Clean air filter using the recommended solvent daily. See engine manual for proper cleaning procedure. Let the filter dry before reinstalling.
3. SPARK PLUG
Check and dean spark plugs regularly. A fouled, dirty spark plug caused hard starting and poor engine performance. Set spark plug gap to recommended clearance. Refer to engine manual.
4. BELT CHANGE PROCEDURE
Remove belt cover from the machine to expose the drive components. To change the primary drive belt, remove clutch from engine drive shaft, by removing boll from the clutch. This releases belt from both the clutch and driven unit.
5. BELT TENSIONING SPECIFICATIONS
NOTICE! Belts may become slightly loose after the first few hours of operation. It is important to retention the belts with the tool provided and use the table given as reference.

Hot Tags: vanse vs836h 24hp 18.4kw ride on hydraulic concrete power trowel manufacturer concrete power trowel for concrete floor, manufacturer, price, cost, for sale