|
No matter what kind of mechanical equipment, if you want to effectively extend its service life, it is necessary to regularly do the maintenance and maintenance of the equipment, which is no exception for the laser leveling machine. In view of the lack of detailed analysis of the maintenance standards and specifications of the laser levelling machine in the relevant technical data, our company will combine many years of work experience to make a simple summary of the correct maintenance methods of the various components of the laser levelling machine, and hope that the majority of users must operate scientifically according to this specification. |
|
| ► Engine maintenance: Choose an antifreeze suitable for the local temperature and replace it every 1 year. Before the winter, the winter fuel should be replaced with a laser leveller in advance to avoid waxing of ordinary diesel in the filter and pipeline due to low temperature. As a result, the engine could not start normally, the anti-icing device of the compressed air system was opened, and the ether level was checked regularly. Many engines require some additive to be added to the coolant, namely SCA (Supply coolant Additive), which usually acts on aluminum. During the part's contact with the coolant, metal corrosion, mineral precipitation, cavitation and cylinder liner foaming are more effectively prevented. |
|
| ► Parts maintenance: Before parking the laser leveler for a long time in winter, mechanical articulation point, lubrication and maintenance work should be carried out on the bearing. Check the integrity of the dust jacket of the concrete laser leveling machine, and replace the damaged sealing ring in time. The metal contact surface exposed to the air should be rust-proof, the engine should be started regularly, and all reduction gear boxes should be operated to prevent the shaft seal and rubber seal ring in the gear box from damaging the parking and gear oil for a long time. |
|
| ► Hydraulic system maintenance: Regularly start the laser levelling machine and turn on all hydraulic functions on the machine, so that the hydraulic drive components work regularly, prevent the relevant seals from being damaged due to long-term parking, metal parts such as cylinder rods and other rust, as much as possible. Retract all cylinder rods into the hydraulic cylinder oil chamber to better protect the cylinder rod surface. |
|
| ► Electrical system maintenance: Please start the laser leveling machine engine every two months, charge the battery, and run all hydraulic actuators, such as rotary hydraulic motor, telescopic cylinder, etc., do not remove the battery from the machine to prevent long-term parking equipment to control the internal software program failure loss. |
|
| Special reminder: once the operation, maintenance and management of the laser levelling machine is improper, it will affect the efficiency and life of the equipment, etc., and may even cause equipment failure, resulting in equipment downtime, therefore, only by doing the daily maintenance and management of the system and the whole machine can effectively reduce the probability of equipment failure, ensure the normal operation of the equipment, and improve production efficiency. | |