The operating procedures and precautions for the concrete laser leveling are as follows:
1. Operation process
Preparation before construction
Before carrying out concrete laser leveling machine construction, corresponding preparations need to be made. First, check that all parts of the leveler are intact and make sure the machine is in good working order. Secondly, determine the materials and tools required for construction, such as concrete, water, cement and other materials, as well as mixers, transport trucks, vibrators and other tools. Finally, determine the specific location and scope of the construction, and measure and stake out according to the design requirements.
Concrete ingredients
According to the construction requirements, the concrete ingredients are mixed together in a certain proportion. During the batching process, attention needs to be paid to the quality and proportion of materials to ensure that the strength and stability of the concrete meet the requirements. At the same time, attention needs to be paid to the mixing time and mixing speed to ensure that the concrete is fully mixed evenly.
Laying steel mesh
Before laying the steel mesh, the specifications, quantity and location of the steel bars need to be determined, and processed and tied according to the design requirements. When laying the steel mesh, attention needs to be paid to the flatness and stability of the steel mesh to ensure that it can withstand the weight of the concrete and the external forces during the construction process.
Laser leveling machine construction
Before the construction of the laser leveling machine, various parameters of the machine need to be adjusted, such as scraper height, vibration frequency, leveling head angle, etc. During the construction process, it is necessary to control the traveling speed and direction of the laser leveling to ensure that the leveling can evenly scrape the concrete. At the same time, it is necessary to observe the flatness and thickness of the concrete and adjust the parameters and operating methods of the leveler in a timely manner.
Follow-up processing
After the laser leveling machine construction is completed, follow-up processing is required. First, trim and clean the completed concrete surface to remove surface impurities and uneven parts. Secondly, maintain and protect the concrete surface, such as covering it with plastic film or spraying curing agent. Finally, the waste during the construction process is cleaned and processed to ensure the cleanliness and environmental protection of the construction site.
2. Precautions
Operators must undergo professional training and qualification before they can operate the concrete laser leveling. Unlicensed operation is strictly prohibited.
Safety warning signs must be set up at the construction site, and full-time safety officers must be assigned to be responsible for on-site safety management.
Operators must understand the principles, structure, performance and operation methods of concrete laser levelings, and master the necessary maintenance knowledge.
When using a concrete laser leveling, you must wear labor protection supplies, such as safety helmets, gloves, work clothes, etc.
Before using the concrete laser leveling machine, you must check whether all parts of the machine are intact. If there is any damage or failure, it must be repaired or replaced in time.
When using a concrete laser leveling, the construction must be carried out in accordance with the design requirements, and the construction parameters or operating methods must not be changed at will.
When using the concrete laser leveling machine, the construction site must be kept clean and standardized, and debris or garbage must not be piled up randomly.
When using the concrete laser leveling machine, you must pay attention to the safe use of electricity and do not pull cables or wires at will.
When using a concrete laser leveling machine, maintenance must be carried out in accordance with the machine maintenance requirements, such as regular oil replacement, machine body cleaning, etc.
When using a concrete laser leveling machine, you must pay attention to the care and maintenance of the machine, such as regularly checking the lubricating oil, cleaning the air filter, etc.
When using the concrete laser leveling machine, care must be taken to avoid collision or damage to the machine. If the machine is found to have abnormal noise or vibration, it should be stopped in time for inspection.
When using a concrete laser leveling machine, care must be taken to protect the machine's electronic components and sensors and other sensitive components. If damage or failure is found, it should be repaired or replaced in time.
When using a concrete laser leveling, attention must be paid to controlling the construction temperature and humidity. If the temperature is too high or too low, it will affect the strength and quality of the concrete.
When using a concrete laser leveling, attention must be paid to controlling the slump of the concrete to ensure good fluidity and easy construction of the concrete.
When using a concrete laser leveling, attention must be paid to controlling the mix ratio and quality stability of the concrete to ensure that the construction quality meets the design requirements.
When using a concrete laser leveling, attention must be paid to controlling the energy consumption and usage costs of the equipment to reduce construction costs and improve economic benefits.