VS836 Construction Tools Mechanical Drive 25HP Ride-on Concrete Road Surface Concrete Finishing Power Trowel With Honda Engine

Once the operator is seated, depress the flameout pedal with the left foot and gently apply pressure to the accelerator with the right. Initiate the engine, grasp the joystick with both hands, and let it operate at a low speed for a brief period. Then, gradually increase the speed for regular operation. To move the machine forward, push the joystick away; to reverse, pull it towards you. For a clockwise rotation, use the right hand to pull and the left to push simultaneously. For a counterclockwise turn, reverse the hand actions. To steer right, push the joystick to the right; to go left, pull it to the left. Release the right foot to idle the machine and cease the blade's rotation. To power down, let go of the left foot. Switch off the engine to conclude the operation.

When encountering the suction cup effect with a disc attachment, avoid holding the accelerator to prevent clutch burning. Instead, while slightly increasing the throttle, adjust the handle to reduce chassis friction or retract the rear frame to disengage the suction cup.

Routinely inspect the belt tension to ensure proper fit.

Prior to operation, verify the engine throttle cable's return to the minimum idle speed and confirm the engine's ability to reach peak speed when the accelerator is fully depressed.

The Weight Is Heavier

The weight is heavier, the compaction effect is better to the ground, the density of the concrete ground is greatly improved, and the construction efficiency is higher than that of the handheld trowel machine.

Dual Disc Operation

The double disc work greatly improves the work efficiency. It can install two pulping discs at the same time to carry out rapid pulping. The construction efficiency is 5-8 times higher than that of the ordinary trowel, and the single operation reduces the labor cost.

Equipped with Honda GX690

Equipped with Honda GX690 high horsepower electric start engine, the power is strong and reliable

LED Light

High brightness lamp can work in dark environment.

Pedal Safety Switch

The pedal safety switch can quickly shut down the engine and provide greater security.The pedal throttle control is sensitive and fast.

Large Capacity Water Tank

Equipped with 19L water tank and fuel tank, it can work continuously for a long time.

instruction

Founded in 2013, the Shandong Vanse Group has taken advantage of the rapid growth in the concrete industry, focusing on delivering high standards, top-tier quality, and efficient operations. The company has rapidly become a national high-tech enterprise, offering comprehensive services from research and development, manufacturing, sales, to after-sales support in the concrete equipment sector. Vanse has formed strategic partnerships with leading companies such as Jingdong Logistics, CATL, Great Wall Motors, and China State Construction Engineering Corporation (CSCEC).

The group includes multiple divisions like Vanse Machinery, Wanhui New Energy, Wanli Precast Machinery Manufacturing, Vanse Road and Bridge, and Shanghai Vanse Machinery. Its products are available throughout China's provinces, municipalities, and autonomous regions, and are exported to more than 30 countries, including the USA, UK, Russia, Germany, Saudi Arabia, and Australia.

In 2018, Vanse Group collaborated with UK experts to incorporate advanced technologies, ensuring their designs and performance meet international standards for ergonomic machinery and laser systems. Moreover, Vanse has established significant cooperative relationships with educational institutions such as Shandong University and Chang'an University, bridging industry needs with academic research and practical applications.

Focused on the future, Vanse Group is committed to pursuing innovations that improve the quality of life for people around the world.

By embracing the present and looking ahead, Vanse aims to create a vibrant future together with its partners!

1,All maintenance and repair procedures shall ensure that the engineis cooled by quenching ice, and the battery negative jointis removed before operation.
2,Before starting, ensure that the engine fuel and lubricant are clean, the engine lubricant level is appropriate, and replace the lubricant on time according to the engine instructions.
3 ,Keep the lubricating oil level in the reducer to meet the requirements, add it in time when it is insufficient, and replace it in time if necessary.
4,When maintaining or replacing the bottom blade and other parts, the machine should be padded with wooden bars at the bottom of the guardring. If the machine needs to be tilted substantially, the fuel oil, oil and water should all be discharged into the appropriate container.
5,Check the belt for wear before starting, and replace it in time if necessary.
6,After work, the cement slurry should be cleaned in time to avoid direct washing of batteries, engines, lamps, switching circuits and other components with water.
7,After 30-40 hours of use, butter should be added after cleaning the connecting joints, coupling splines, universal joints and other components, check the loosening of fastening bolts, check the battery and clean the pile head, and repeat the above process after long-term shutdown.
8,It is recommended that all blades be replaced at the same time in case of excessive wear, so as not to affect the stability of the machine operation.
9,When the observation port of the battery is black, it is charged every 3-6 months. If the installed battery is not used for the time being(more than 2 days), the negative clamp of the battery should be removed to prevent leakage.
 

Deficit prevention instructions: In order to prevent the phenomenon of power shortage of the riding polisher, when the machine comes out, the positive pole, negative pole and battery pole are all in the state of dismantlement. Users need to connect the corresponding pole first when they use it.

Hot Tags: VS836 Construction Tools Mechanical Drive 25HP Ride-on Concrete Road Surface Concrete Finishing Power Trowel With Honda Engine, manufacturer, price, cost, for sale